| Showing products 1 to 13 of 13 |
Barcol Hardness Testers
| The Barcol Impresser is a hand-held portable hardness tester which is ideal for field testing the hardness (and hence the cure) of epoxy and polyester boatbuilding resins. Incompletely cured resins have greater moisture permeability than optimally cured examples and will also provide lower mechanical strength. The Barcol impressor was originally developed by Walter Colman during WWII for the United States Army Air Corps. The US authorities were concerned that aircraft could be sabotaged by substituting aluminium rivets for soft lead or wooden ones which would fail during flight. The Barcol Impresser was later used to check the temper of aluminium fire ladders and is now used in many diverse industries. There are three different types of Barcol impresser, all sharing the same body. The #934-1 is the best known and is the default choice for soft metals and hard plastics. The #935-1 uses a softer pressure spring which provides more meaningful readings from GRP composites and causes less damage. The #936-1 uses a larger indenter point and is best suited to hard rubbers leathers. Alongside new stock and spare parts we also have a small selection of used impressers which are carefully checked, cleaned and calibrated before sale. Please note that hardness of plastics changes significantly with temperature, therefore it is important to know the temperature of specimens when measuring their hardness. |
Barcol Indenter Point GYZJ 6-5
Indenter Point for Barcol 934-1 and 935 Impressers£105.00 (ex VAT)
Barcol Indenter Point GYZJ 67
Barcol GYZJ 67 Indenter Point for 936 Impresser Only£105.00 (ex VAT)
Barcol Spring AYRS-146
Barcol AYRS-146 Pressure Spring for 935 and 936 Impressers£32.00 (ex VAT)
Barcol Spring GYZJ-3
Barcol GYZJ-3 Pressure Spring for #934-1 Impressers£32.00 (ex VAT)
Barcol Test Disk GYZJ-070
Barcol Calibration Disc GYZJ-070 for 936 Impresser (marked 48-50).£22.00 (ex VAT)
Barcol Test Disk GYZJ-078
Barcol Calibration Disc GYZJ-078 for 934-1 Impresser (Marked 43-48)£16.65 (ex VAT)
Barcol Test Disk GYZJ-250
Barcol Calibration Disc GYZJ-250 for 934-1 Impresser (Marked 87/89)£16.65 (ex VAT)
Barcol #934-1 (New)
The Industry Standard Hardness Tester for Hard Plastics and Softer Metals£985.00 (ex VAT)
Barcol #934-1 (Used)
The Industry Standard Field Hardness Tester for Hard Plastics and Softer Metals£450.00 (ex VAT)
Barcol #935 (Used)
A Field Hardness Tester for GRP and FRP Composites£515.00 (ex VAT)
Barcol #936-1 (New)
A specialist Hardness Tester for Lead, Hard Rubbers and Leathers£707.50£541.66 (ex VAT)
Barcol #935 (New)
A Field Hardness Tester for GRP and FRP Composites£985.00 (ex VAT)
Barcol Test Disk GYZJ-069
Barcol Calibration Disc GYZJ-069 for 935 Impresser (Marked 87-89)£16.65 (ex VAT)
